DIY SHAKER CABINET DOORS 

WWW.THEHANDYMANSDAUGHTER.COM

Making Shaker cabinet doors is easier than you think! I'll show you how to use a router table to build these DIY Shaker cabinet doors yourself!

WHAT YOU NEED

See how I made my doors using a router table, some wood, and a few other supplies.

Most important, measure the cabinet doors. 

Use rail and stile router bits to cut the tongue and groove of the shaker cabinet door.

Cut the center panel of the cabinet door, and do a test fit.

Apply wood glue and assemble the shaker cabinet door together.

Next, you need to clamp the cabinet doors, and allow the wood glue to dry.

After the glue dries, you can sand the cabinet door, and fill any gaps.

Finally, you can apply paint or stain to the shaker cabinet doors, and install.

Step back and admire your hard work!